Accessory

XPG STORM

The dimensions for this product are 8.14cm (L) *2.2cm (W) *2.4cm (H). The position of M.2 slots on different gaming motherboards can vary. As a result; there might not be sufficient space for everything; such as a graphics card or PCIe3*1 slot. It is recommended users check that an extra M.2 slot is available on their motherboard and that there is sufficient space before purchasing a STORM.
This product is designed for DIY desktop PCs and not laptops. Its dimensions are 8.14cm (L) *2.2cm (W) *2.4cm (H) and therefore not suited for laptops.
The STORM's RGB lighting consists of three light bulbs; red (R); green (G); and blue (B); and they control the colors generated. At present; there are some gaming motherboards that may experience signal leakage when controlling RGB lighting; which may in turn cause problems with the generation of the most commonly used color; red.
The suggested voltage range is 10.5~12V; which allows users the flexibility to adjust fan speed in accordance with the sound volume. RGB lighting is also associated with voltage; so when the voltage drops below 11V it may affect the RGB lighting. XPG is looking to introduce a low-noise design in the future to offer users an improved experience.

Audio

EMIX I30

The jack plug on the EMIX I30 supports sound for the headset and the use of a microphone; and is therefore best suited for smartphones; tablets and other mobile devices. PCs support sound and the use of a microphone via separate sockets; so for the EMIX I30 to work properly with a PC a Single-Input Dual-Output (SIDO) converter is required.

SOLOX F30+EMIX H30

Make sure the 3.5mm jack plug is completely inserted into the SOLOX F30. To provide enhanced transmission capabilities; the audio output socket is constructed with metal; and as a result?has a tighter fit. The tighter fit may cause the jack plug to appear to be completely plugged in.
Ensure your XPG headset has been set as the default audio device. Right click the sound icon on the taskbar. Select audio device (P) XPG High-Speed True HD Audio and set it as default (S).
The audio receiver is located on the side with the microphone icon and a jack socket. The light indicates if the microphone has been properly installed. It does not indicate if the microphone has been muted or is recording.

XPG PRECOG

Hi-Res content is lossless and requires an analog signal for optimal performance. Audio Class Devices via USB compromise on range of depth in exchange for higher compatibility and portability.
3.5mm connectors do not provide enough power to turn the LEDs on. Therefore; LEDs are only available via USB.
While most people are not able to hear over 18 KHz; the additional resolution in frequency reduces distortion thanks to the electrostatic diaphragm.
Both technologies use additional microphones in specific locations to detect audible ambient noise and digitally remove them. ENC works on processing the microphone input instead of the audio output.
XPG PRECOG has a high sampling rate (24 KHz instead of the usual 18 KHz on other headsets) thanks to a higher-end dual-chip DSP solution for the Analog-To-Digital conversion (ADC).
The processing of cancellation is done close to real time with no audible time lag. Delays in voice transmissions are dependent on network topology and software package transmission priorities.
We have tested our headphones with success with many different software including DISCORD; Teamspeak; Skype; and several other apps with success. BTW; the headset works great for conference calls too!
Our testing showed no issues with all the latest portable consoles and gaming phones. At the time of launch; we only encountered compatibility issues with devices that only support 2 Channels via USB and with some newer Huawei phones.. However; most of these devices still offer a headphone jack.

Keyboard &Mouse

XPG BATTLEGROUND XL

CORDURA® is a collection of fabric technologies used in a wide array of products including luggage; backpacks; trousers; military wear and performance apparel. Cordura fabrics are durable and resistant to abrasions; tears and scuffs.
Please use a clean damp cloth to clean the product properly. Do not use any soaps or solvent agents on the mouse pad surface to preserve its integrity.
Please roll XPG BATTLEGROUND with the printed side facing outward and the rubber side facing inward.

XPG BATTLEGROUND XL PRIME

CORDURA® is a collection of fabric technologies used in a wide array of products including luggage; backpacks; trousers; military wear and performance apparel. Cordura fabrics are durable and resistant to abrasions; tears and scuffs.
Please use a clean damp cloth to clean the product properly. Do not apply any soap or solvent agent on the surface to preserve its integrity.
Please roll XPG BATTLEGROUND with the printed side facing outward and the rubber side facing inward.
XPG BATTLEGROUND XL PRIME comes with Micro-USB to USB cable. This provides power for the LED lighting
No; you can setup the lighting through the control box on the top left hand corner. (refer to question 5)
There are two light strips on the mouse pad; you can select the light strip you would like to control; you can also select both light strips.
Step 1- Double click the control button to select the light strip.
Step 2- The selected lighting strip will flash; you can also select both light strips; in which case both will flash.
Step 3- Click the control button to change the lighting color/effect.

INFAREX K20

Windows 7/8/10 have a built-in screenshot function called

XPG SUMMONER

CHERRY MX switches are the absolute industry benchmarks; developed and manufactured in Germany.
XPG SUMMONER accessories include a magnetic wrist rest; additional nine red keycaps (WASD; four arrow keys and ESC) and a keycap puller.
Here are the characters of the different switches; you can choose the one that fits best for you; Alternatively; try the switches at your nearest XPG dealer and choose the best fit for you.
No software is needed; you can setup the lighting through the keyboard. (refer to question 3)
You can setup the lighting through the keyboard.
Press FN + UP/DOWN arrow key to adjust the lighting brightness
There are 5 lighting selections in the following sequence: OFF / 25% / 50% / 75% / 100%
Press FN + LEFT/RIGHT arrow key to choose a lighting effect
There are 7 predefined Lighting effects in the following sequence: Static / Breathing / Trigger / Explosion / Color Cycle / Color Wave / WASD mode
【XPG SUMMONER How-to Video】How to adjust the RGB lighting effects on XPG SUMMONER-https://youtu.be/PYBUw98xt2E
Please use a clean damp cloth to clean the product properly.
Do not apply any soap or solvent agent on the surface to preserve its integrity.
You can remove the keycaps using the keycap puller.
Under the normal mode, Windows key can be disabled or abled by pressing “FN” + “WINDOWS” key. Windows key is disabled by default when gaming mode is on, including when under any gaming profiles and cannot be activated.
【XPG SUMMONER How-to Video】How to disable Windows key- https://youtu.be/8jcuvNVPiAI
Under the normal mode; the static color is red of your XPG SUMMONER. Static colors are assigned by default to each gaming profile as follows: Profile 1: blue;Profile 2: indigo; Profile 3: white; Profile 4: green; Profile 5: yellow.

PCComponent

XPG BATTLECRUISER

You can install up to eight fans on the XPG BATTLECRUISER. If your RGB fans has a 3pin or 4pin RGB header; it can be controlled with XPG PRIME CONTROLLER on the front I/O panel.
Yes; the XPG BATTLECRUISER has two USB 3.0 ports and a USB Type-C port on the front I/O panel.
XPG BATTLECRUISER comes with four ARGB fans; three in the front and one in the back.
The XPG BATTLECRUISER can support graphic cards up to 400mm in length.
XPG BATTLECRUISER supports E-ATX; ATX; Micro ATX and Mini-ITX motherboards.
XPG BATTLECRUISER can accomodate radiators up to 360mm in the front; 360mm on the top and 120mm at the back. Please note you cannot install two 360mm radiators at the same time.
Please consult USB 3.0 connection section of your motherboard's.

XPG CORE REACTOR

Please only use the modular cables bundled with the power supply unit. DO NOT use any third party cables or extension cables.
Japanese manufacturers are a leader in the development of new water-based electrolyte systems with enhanced conductivity; and they produce the most reliable and best-performing products.
If your system does not turn on after installing the power supply, please follow the troubleshooting guide listed below: 1. Make sure the AC main power cord is connected to your PC correctly.
2. Please make sure the AC source is switched On
3. Please make sure the AC On/Off switch on the back panel of the power supply unit in the “I” (On) position.
4. Please make sure the MB & CPU Power Socket & connectors are connected correctly on the Motherboard.
5. If you still have problem turning on your PC, please contact ADATA Tech Support, Service Center or your local dealer.
.NEVER, under any circumstances, open the power supply unit or attempt to repair the power supply yourself. This is extremely dangerous due to the high voltage.
.DO NOT insert any objects into the fan grill or the ventilation area of the power supply unit.
.DO NOT place any objects in front of the fan or the ventilation area of the power supply unit that may obstruct or restrict the airflow.
.USE ONLY the modular cables bundled with the power supply unit. DO NOT use any third party cables or extension cables with this unit.
.Avoid dust, humidity, and temperature extremes. Do not place the power supply unit in any area where it may become wet.
.The power supply unit is for integration into a computer, and not intended for external or outdoor usage.
.Failure to comply with any manufacturer instructions and/or any of these safety instructions will immediately void all warranties and guarantees.

XPG INVADER

You can install up to nine fans on the XPG INVADER. If your RGB fans have a 3pin or 4pin RGB header; they can be controlled via the XPG PRIME CONTROLLER on the front I/O Panel.
Yes; the XPG INVADER has two USB 3.0 ports on the front I/O panel.
XPG INVADER comes with two black fans; one in the front and one in the back.
The XPG INVADER supports graphics cards up to 400mm in length. Be sure to confirm the size when purchasing a graphics card.
The XPG INVADER supporst ATX; Micro ATX and Mini-ITX motherboards
XPG INVADER can accomodate radiators up to 360mm in front; 240mm radiators on the top and side; and 120mm radiators at the back.
Please consult the USB 3.0 connection section on your motherboard's manual.
You can install two SSD behind the motherboard tray in the 2.5" hard drive bracket and two SSD in the hard drive brackets under the PSU cover. Note, when you install four SSD’s you will forgone space for 3.5" hard drives.

XPG LEVANTE

USE ONLY the modular cables bundled with the power supply unit. DO NOT use any third party cables or extension cables with this unit.
XPG LEVANTE is filled with low-evaporation coolant rated with a 50;000 hours lifespan. You will never have to worry about refilling the coolant.
The XPG LEVANTE is build and tested to ensure leakage doesn't occur.
XPG LEVANTE is designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. If your motherboard has a 5V addressable RGB header, you can control the lighting effect through the respective software. For more details, please refer to the motherboard manufacturer’s website.
The XPG LEVANTE supports Intel 1366; 115x ; 2066; 2011 and AMD AM4 socketsXPG LEVANTE support Intel 1366; 115x ; 2066; 2011 and AMD AM4 sockets.